VIBEZ ORIGINAL HYBRID
The Split Head King Vibez Original Hybrid
The Split Head King matches standard King dimensions — 76 by 80 by 11 inches — with a split-head configuration that lets one side of the head articulate independently on a compatible adjustable base. It combines the widest sleeping surface in the range with independent head positioning for two sleepers.
Specifications
- Dimensions
- 76" × 80" × 11"
- Width
- 76 inches
- Length
- 80 inches
- Height
- 11 inches
- Head configuration
- Split head, for adjustable bases
- Price
- From $9,499
- Minimum room size
- 10'4" × 8'8"
Will it fit your room?
Allowing 24 inches of walking clearance at both sides and the foot of the bed, a Split Head King needs a room of roughly 10'4" × 8'8" (124" × 104").
Outside dimensions are identical to a standard King, so the floor-plan requirement and bedding size are unchanged. Plan the room around the full 76-inch width with clearance at both sides — the whole point of a split-head King is that both sleepers can use their own side independently, which only works if both sides are reachable.
SIZING UP
How the Split Head King compares.
Against a standard King, you are paying for split-head articulation rather than additional surface — the dimensions match. Against a Split Head Queen, you gain 16 inches of width at the same length and the same articulation. If neither sleeper uses an adjustable base, the standard King is the straightforward choice.
Every size of the Vibez Original Hybrid is built the same way: a square-cut EcoGrid comfort layer over a transition layer, above individually wrapped pocketed coils, in an 11-inch profile. The size changes the surface area, not the construction.
| Size | Dimensions | From |
|---|---|---|
| Twin XL | 38" × 80" × 11" | $6,199 |
| Full | 54" × 75" × 11" | $6,999 |
| Queen | 60" × 80" × 11" | $6,999 |
| Split Head Queen | 60" × 80" × 11" | $7,999 |
| King | 76" × 80" × 11" | $8,499 |
| Split Head King | 76" × 80" × 11" | $9,499 |
SPLIT HEAD KING QUESTIONS
Common questions.
How is a Split Head King different from a split King?
A split King is two separate Twin XL mattresses side by side, so each sleeper has a fully independent mattress. A Split Head King is one mattress measuring 76 by 80 inches with only the head section split, so the sleeping surface stays continuous and there is no gap down the middle.
Does it work on a flat foundation?
Yes, it sleeps as a standard King on a flat base. The split-head design only provides a benefit on a base that articulates, so choose it only if you are using or planning an adjustable base.
Does it take standard King sheets?
The outside dimensions are standard King at 76 by 80 inches, so King fitted sheets fit. A single fitted sheet across both head sections will restrict how far they can move independently.